: +91- 97275 90994

: contact@joyousindustries.in

Inquiry

Joyo Shiled 7002

Home / Waterproofing Solution

7002 SBRLTX

The Ultimate Solution For Water Proofing

Ultra PremiumGrade Cement-based adhesive with mixed binders with excellent work ability and great whiteness, endowed with high flexibility, high adhesion, with reduced slip and extended open time, for the placement of interior and exterior pavements and interior coatings. Especially recommended for the installation of all types of ceramics on plasterboard partitions and suitable for gypsum or anhydrite substrates.

Recommended User

  • Concreat repair : Spalled concrete, repairing floors, beams and pre-caste slabs, chajjas etc.
  • Bond Coat : For bonding new concrete to old concrete, Plaster, Stone/brick masonry.
  • Plaster repair : For repairing plaster or making Water Proof Plaster Which is better than normal Plaster.
  • Floor screeds and toppings : Abrasion resistant and non-dusting floors.
  • Waterproofing : Basements Side Walls and rafts, lift pits, inspection Pits, Sunken/ overhead Water tank, sunken Portions of bathrooms and toilets, balconies, chajjas, exposed roofs before finished screed.
  • Other typical applications : Bedding tiles, fixing or re-fixing slip bricks.

Primary Application

  • Toppings, repairs and leveling concrete surfaces.
  • Thin sets, terrazzo, stucco and bonding coats.
  • General reconstruction Work /latex modified overlays.
  • Bridge decks, highways and parking decks.

Features Benfits

  • Reducing cracking through increased mortar flexural strength increases wear resistance under rubber.
  • Wheeled traffic Improves bond strengths to hardened concrete increases durability during freeze/thaw cycles.
  • Increases mortar tensile strength.

Coverage Estimates

Packing : Joyo Shiled7002® _SBRLTX is Supplied in 5Ltr, 20Ltr

Shelf Life

Store under cover, out of direct sunlight and protect from extremes of temperature. In tropical climates the product must be stored in air-conditioned environment. Shelf life is 12 months when stored as above.

Specification
Properties of Polymer
ASPECT Milky-white, Syrene-Butadiene co-polymer latex
PH 371
RELATIVEDENSITY 1.02+0.01 at 250c°
SOLID CONTENT 37%1%
RELATIVEDENSITY Milky-white, Syrene-Butadiene
SOLID CONTENT 371
PH 1.02+0.01 at 250c°
RELATIVEDENSITY 37%1%
SOLID CONTENT Milky-white, Syrene-Butadiene
RELATIVEDENSITY 371
SOLID CONTENT 1.02+0.01 at 250c°
PH 37%1%
SOLID CONTENT 1.02+0.01 at 250c°
RELATIVEDENSITY 37%1%